The Tado Core plugin enables Rithum Switch to be integrated with your Tado Home. This plugin is available for purchase here. After purchasing, follow the instructions to assign your licence in your new licence email.
When successfully assigned, in the settings menu on Rithum Switch:
Select Integrations > Add Integration > Tado > Add Tado Home...
Enter your Tado Home username followed by your password
A message will be displayed when successfully connected, press OK to close the message
On the main Scenes screen you will now have a thermometer icon button on the left hand side which will open the Climate screen. When opening the Climate screen for the first time you will see a list of available heating and air-conditioning zones for you to select from.
The top-left button shows the currently selected zone. Pressing this button shows the list of available zones and allows the selected zone to be changed.
The power button beneath the zone button allows the system power to be temporarily turned on/off.
The temperature display at the top shows the temperature set point. Press the +/- buttons on either side to adjust the required temperature. Alternatively, slide the temperature scale in the centre of the screen left or right.
All changes made in the Climate screen override the current schedule mode/temperature. They will automatically be removed at the time of the next scheduled change. To manually return to the current schedule state, press the Resume button at the top-right of the screen.
The current temperature of the zone is shown at the bottom of the screen.
Heating zones have a boost button below the resume schedule button. Pressing this button changes the set temperature to 25° for a period of 30 minutes. Press the resume schedule button to cancel it.
At the bottom-right of the screen there is a flame icon which is shown in grey when the system is not actively heating and in colour when it is.
After pressing the power button to turn the system on you will see a list of settings for mode (e.g. 'Cool' or 'Fan') and related settings such as 'Fan Speed' or 'Vertical Swing'. Press on each to select a different option. Note that changing the mode setting may change which additional settings are available. Press the Start button at the bottom of the screen to turn system power on with your selected settings.
When the system is powered on then the ... button below the resume schedule button becomes enabled. Pressing this button allows the current mode/settings to be altered.
When a cooling mode is active then a blue snowflake icon is displayed in the bottom-right of the screen.
If you require any further assistance then please contact us at Rithum support.
Article is closed for comments.