Control4

Requirements

• A Control4 system on the same network as Rithum Switch.
• Control4 Minimum OS version is 2.10.6 (It is recommended to run the latest if possible)
• The Rithum Control4 driver installed on Control4 (attached at the bottom of this page, before the line break)
• The Control4 plugin installed on Rithum Switch
• Rithum Switch minimum firmware version 3.10.0

Current Capabilities

• Integrate the Rithum Stat thermostat with Control4
• Activate Control4 scenes from the Rithum Scenes screen
• Control on/off/brightness of Control4 loads (or a zone of loads) from the Rithum Levels screen

See the Control4 User Guide here.

Limitations

• Changes made externally from Rithum Switch can take up to 10 seconds to be reflected on the switch

Current Version

1.2.0

General Release Start Date: 17th April 2026

In This Release:

• Improvement to reduce Control4 processor CPU usage (requires driver v015)

Previous Versions

1.1.1

General Release Start Date: 29th May 2025

In This Release:

• Workaround fix to cater for loads configured without a name

1.1.0

General Release Start Date: 15th May 2025

In This Release:

• Support for Rithum Stat cooling zone in addition to heating zone along with FCU modes

1.0.0

General Release Start Date: 14th November 2024

In This Release:

• Initial release

Download Driver Here: